Parts & Accessories
$49.99
Bluetooth and ANT+ Heart Rate Sensor & Calorie Tracker
Connect. Track. Share. The TICKR heart rate monitor accurately tracks your heart rate and calorie burn during any activity or workout. Its new design makes it the lightest and slimmest heart rate monitor on the market! Equipped with Bluetooth and ANT+ technology, TICKR offers an easy and reliable way to connect heart rate to your favorite training apps and fitness devices, and now supports up to three simultaneous Bluetooth connections. The new integrated heart rate sensor and strap design provide a more secure connection and fit, so your training can be optimized, measured, and shared.
NEW! INTEGRATED CHEST STRAP DESIGN
The integrated sensor and strap design of the TICKR provides a more secure connection and a more secure fit to prevent sliding and shifting while working out.
NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD
At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable!
NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS
TICKR supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout.
NEW! TOP DISPLAY LED INDICATOR LIGHTS
Two LED lights show visual confirmation of the TICKR connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute).
DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY
Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately.
REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING
TICKR measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics.
FRONT SENSOR & STRAP CONNECTION
The front connection on the TICKR sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks.
COIN CELL BATTERY
Includes a coin cell battery that can last for over 500 hours of workouts.
ADVANCED PERFORMANCE MATERIAL STRAP
Made from advanced performance materials, the TICKR strap is designed to fit comfortably chest, yet stay securely in place during intense activity.
APPLE WATCH AND APPLE TV INTEGRATION
Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout.
THIRD PARTY APP COMPATIBILITY
Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running.
TECH SPECS
- Dimensions (LxWxH): 2.5" L x 0.2" W x 1.5" H (6.3cm L x 1cm W X 3cm H)
- Weight: 1.7 oz (48 g) with strap
- Battery: Coin Cell (CR2032)
- Battery Life: Over 500 active hours
- Sweatproof: Yes (Handwashable Strap)
- Water Rating: IPX7 (Waterproof up to 5 ft.)
- Strap Length: Adjustable from 23" to 48"
IN THE BOX
- TICKR heart rate pod
- Adjustable soft strap
- CR 2032 Battery (installed)
- Quick Start Guide
- Important Product Info Guide
$79.99
Protects your floor from sweat and bike grime.
Product Features:
- Protects your floor from sweat and bike grime.
- Keeps your trainer from "walking" during intense workouts.
- Durable construction absorbs vibration and noise.
- Training mat measures 65 x 36 inches.
- Black PVC foam gives the training mat superior sound absorption.
- Resistant to moisture, and easy to clean with soap and water when necessary.
$49.99
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
$29.99
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$29.79
• Plastic riser block allows the position of front wheel at one of two heights
$8.79
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$59.99
Adapts a thru axle hub bike for a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.00 & 1.75
What's Included:
- Thru axle
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$49.99
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
$39.99
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only
$29.99
Keeps corrosive sweat from reaching your frame.
- Cell phone pouch included.
$359.99
Trainer Mission Control
Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland.
And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one.
- Stay Charged: built-in power strip keeps training necessities nearby and powered up.
- Pick Your Height: adjustable for wide range of bikes and training configurations.
- Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride.
- Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing.
- Enhanced Experience: a great addition to indoor training.
Specs
- Base: 13-inches wide x 36-inches Depth
- Desk Top: : 12-inches Width x 20-inches Depth
- Adjustable Desk Height from Floor: 40- to 55-inches
- Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware
- Cord Length: 6- foot AC cord
- Built-in power strip with 2 AC and 2 USB outlets
- Built-in cord retention clips for easy cable management and a clean look.
$59.99
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch
$129.99
Everything you need for the best indoor trainer experience possible.
- Can be used across a wide range of trainer setups.
- Includes Trainer Mat, Climbing Block and Saris towel.
$29.99
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$12.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura.
- Alloy clamp for mounting your own device on handlebar or stem
- Lightweight and rustproof aluminum construction
- Hex wrench required for instillation and removal
- Clamp body has (1) M5 Thread hold in center
- 22.2 mm-28.6 mm diameter range
$37.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$70.00
The Giant Indoor Trainer Mat is the perfect noise-reducing floor protection for indoor training.
- Rubberized material for easy rinse off after your workout
- ‘Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out
- Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors
- Comes rolled-up in draw-string, mesh carry bag with shoulder strap
$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage
Page 1 of 2
Next page